How to install SPC laminate flooring with herringbone pattern?
- 21/12/2023
- interior-flooring-materials
Installing SPC (Stone Plastic Composite) herringbone pattern flooring has similar steps to installing general SPC flooring, but there are some additional points that must be considered. To get beautiful and durable results. Here are the steps you can take to install herringbone SPC flooring:
1. Prepare the floor:
Make sure the floor is level, and clean from dirt and dust.
If the floor is very uneven, you may need to refinish the floor.
2. Measure and cut the floor:
Measure the ground to find locations with flood systems or utility poles. and mark.
Cut out the perfect space in a herringbone style as you want.
3. Install waterproof insulation. (Underlayment):
Install your chosen waterproof insulation, according to the manufacturer's instructions.
4. Install SPC flooring:
Start installing the SPC floor from a corner away from the walkway, and apply the floor with the SPC floor glue brush.
Insert each disc in the correct direction, using the manufacturer's recommended installation method (Click Lock or Adhesive).
5. Cut the floor:
In the event that the floor must be cut, use the appropriate cutting method. (Electric camera slider or slider).
6. Install the wings (Baseboard) or solder profile:
Installing wings or interlocking profiles in the space between the floor and the wall, will make the installation look more neat.
7. Clean:
Clean the floor using a method appropriate to the material. (Do not use scrubbing oil).
8. Protection:
You can add a waterproof cover or special protection product to increase resistance to scratches, dings, and dings.
9. Test:
Test the floor to check its strength and popularity.
Follow the correct steps and pay close attention to the manufacturer's instructions. So that your herringbone SPC flooring installation will have the best results.
